Explore exciting news articles and learn more about us.
Unless the load (generator or pump etc.) can operate at high speeds, the associated turbine normally connects to the load via a reduction gearbox. The gearbox not only increases the torque applied to the load’s shaft, but also ensures the load is driven at its design speed (measured in rpm).
2025-01-13
The oil systems (hydraulic and lubrication) of a turbine are critical not only for normal operation but also during power outages. Normally, the lubrication oil system is connected to the control oil system, depending on the turbine design.
2025-01-13
A typical power plant steam turbine will have steam entering the HP turbine at 180 bar (2610 psi), 540⁰C (1,000⁰F). Steam from the HP turbine is then returned to the boiler where it is reheated to 540⁰C (1,000⁰F) at approximately 45 bar (652 psi).
2025-01-13
Steam turbines can be classified as either back-pressure or condensing.
2025-01-13
Steam turbines can be classified as either reaction, impulse, or a mixture of both; a large steam turbine will almost always have both impulse and reaction stages.
2025-01-13
Steam turbines are a common site at many industrial plants. The applications of steam turbines are numerous due to their high efficiency and high reliability.
2025-01-13
Biochar is a solid material obtained by high temperature pyrolysis of biomass-based feedstock. At high temperatures and in an anaerobic environment, the volatile organic compounds (VOCs) in the biomass feedstock are removed, leaving a stable carbonaceous residue, which is called biochar. It can exist in the soil for thousands of years.
2025-01-13
Carbon sinks are the process, activity or mechanism that removes CO2 from the air. As a new type of carbon sink, biochar is making a positive impact on the earth.
2025-01-13
Dabonn's Puro earth approved pyrolysis equipment is suitable for wooden waste, straw, nut shells, EFB, etc. The biochar produced can be used for carbon removal.
2025-01-13Get Free Solution
We provide medium and long-term solutions to the problems of biomass waste, transforming waste into energy at no environmental cost and making it economically viable and at the same time compatible with the international environmental regulations and standards
Get More Product Information For Free
